Steam & Hot Water Hose

Ralco's steam hose and hot water hose ranges are designed to be used in applications where temperatures can reach up to +232 with pressure up to 18 bar.

At Ralco we understand that safety is paramount in any steam hose application and therefore are pleased to offer our hose testing services for any assemblies that are purchased from us.

Our steam hose range meets EN ISO 6134/2A, detailed below:

EN ISO 6134 Type 1 = For hot water and saturated steam, textile reinforcement, with a working pressure of up to 6 bar at a maximum temperature of +164.

EN ISO 6134 Type 2/A = For hot water and saturated steam, wire braid reinforcement, with a working pressure of up to 18 bar at a maximum temperature of +210.

IMPORTANT SAFETY INFORMATION: 1. All hoses used for steam should be clearly marked as steam hose with working pressure and temperature rating.2. It is important that working pressure and temperature is not exceeded.3. Do not allow hose to remain under pressure when not in use.4. We recommend that all steam hoses are drained after use to avoid damage.5. Avoid excess bending or flexing near the hose couplings.6. Carry out periodic inspections of hose including checking for blisters and lumps.

Ralco offer a complete range of steam hose assemblies including hoses fitted with BOSS fittings and BOSS clamps, please visit our hose assembly section for further information.

Please select from the following subcategories listed in the Steam & Hot Water Hose category or view all products.

Steam & Hot Water Hose » Rubber Steam & Hot Water

Ralco steam hose range is supplied with two reinforcement option, textile reinforcement (7 bar & 164 degrees) or wire braided (17 bar and 210 degrees). We offer our 17 bar steam hose with either a red or black cover and our 7 bar steam hose with black, blue or white cover. Our hoses meet the specification drawn out for use with saturated steam including, BS5122, BS5342 and EN ISO 6134.

We can also offer our rubber steam hoses range as assemblies with steam hose couplings and interlocking clamps, please visit our hose assembly section for further information.

Steam & Hot Water Hose » Steam & Hot Water Hose Assemblies

Ralco offer a range of steam hose and hot water hoses assemblies using our range of mandrel built rubber suction and delivery hose, black or blue cover textile (7 bar) and red or black cover steel (17 bar) reinforced mandrel built steam hose.

Steam hose assemblies are fitting with BOSS type steam hose couplings with interlocking safety clamps in bore sizes from 19mm (3/4") to 51mm (2").

Hot water hose assemblies are fitted with Camlock, Bauer or PN16 flanged hose tails and are available from 19mm (3/4") to 102mm (4").

Our steam hose assemblies can be offered pressure tested and certified if requested.

Listed below are some examples of the saturated steam and hot water hose assemblies that we can offer, please contact our sales team with any requirements that you may have.

Steam & Hot Water Hose » Featured Products

View all products in the Steam & Hot Water Hose category.